 Scratch
Pen 426
|
|
| acc.
to van Laar |
 |
A practical instrument with tungsten carbide tip 0.5 mm in diameter. The
instrument is used for standardised scratching of corrosion test samples.
|
SCRATCHMARKER
427 |
|
| |
 |
Portable instrument to apply defined scratches through coatings on specimen
panels used for corrosion tests. Compact construction for fatigue-free operation.
Scratch tool with van Laar geometry. Defined adjustment of the depth of
the scratch in increments of 25 microns.
|
Model 428 Handcutter |
|
| |
 |
Model 428 Handcutter, for specimen preparation in corrosion testing.
|
Model 434 Solventchecker Corrosion Testing Instrument |
|
| |
 |
Model 434 Solventchecker, corrosion testing instrument used for static tests to determine the resistance of paints and plastic coatings to the effect of chemicals such as acids, alkalines, salt solutions and organic fluids.
|
Scratch
Stylus 463 |
|
| acc.
to Sikkens |
 |
This hand operated instrument complete with carbide cutting tip provides
a convenient means of scoring a 1 mm wide rectangular track in a surface
coating - for corrosion tests.
|
HYGROTHERM
519 |
|
| ISO,
ASTM, BS, DIN, NF, VDA, ECCA |
 |
Inexpensive apparatus for testing the corrosion resistance of specimens
in condensation water climate with or without SO2 addition in accordance
with different standards. Robust 300 l plastic chamber with front door loading.
A larger version with 1000 l test chamber volume can be supplied in special
design.
|
HYGROTHERM
519A |
|
| ISO,
ASTM, BS, DIN, NF, VDA, ECCA |
|
Corrosion test apparatus for standardised tests in condensation water climat
with or without SO2 addition. The functions "heating", "gas dosing", "draining" and "venting" are
controlled by a programmable timer.
|
SOLARBOX
522 |
|
| ISO,
ASTM, DIN, UNI |
 |
Compact instruments to determine the resistance to exposure to sun light
using a Xenon high pressure lamp (1500 W or 2500 W). Adjustable levels of
irradiance, uniform illumination by special mirror system, exchangeable
filters for variable UV fraction. Programmable flooding system for periodic
wetting of specimens available.
|
Model 529 Hygrotherm Humidity Cabinet |
|
|
 |
For condensed water tests (constant humidity) in accordance with DIN EN ISO 6270-2,
DIN 50018, DIN 53771, DIN 55358, DIN 55991 T1, ISO 11503, ISO 3231, ISO 4541, ASTM D 2247-97, BS 3900:F8 and NF T 30-055.
|
Salt
Spray Corrosion Test Apparatus 606 |
|
| ISO,
ASTM, BS, DEF, DIN, JIS, NF, SIS, VDA, ECCA |
 |
For tests in accordance with all salt spray standards. Corrosion resisting
test chamber with circular dome or rectangular chamber, of plastic construction.
Special dimensions upon request. Operator friendly controls for up to 2
test chambers with volumes of 400 l and/or 1000 l.
|
Cyclic
Corrosion Test Apparatus 608 |
|
| VDA |
 |
For testing vehicle components using cycles of changing corrosive effects
in accordance with VDA 621-415. Basic concept, design details and dimensions
as for Model 606. Microcomputer to control test cycle (neutral salt spray
SS DIN 50 021, alternating condensation water climate SFW DIN 50 017, ambient
temperature DIN 50 014).
|
COROTHERM
610 |
|
| ISO,
ASTM, BS, DIN, NF, SIS, DEF, FTMS |
 |
Simple and low cost test apparatus for continuous salt spray and condensation
water testing. The test chamber with a volume of 400 l and all electric
and pneumatic components to operate and control the test cycle are incorporated
into a compact rectangular cabinet of plastic material. Complete, with specimen
holders, storage tank for 90 l salt solution, pressure gauge and LCD for
the temperature regulator and test time counter.
|
Model 639 Corrocutter, Test Panel Scratcher |
|
|
 |
Model 639 Corrocutter, Test Panel Scratcher to define scratches on coatings of corrosion testing panels.
|
