 Variable
Impact Tester 304
|
|
| ISO,
ASTM, DIN, NF, ECCA |
 |
For tests on coatings for crack formation, breaking off, adhesion and
elasticity. A bulge is formed in the sheet metal by a falling weight
with a hemispherical end. The coating can be on the outside or on
the inside of the bulge. The energy of blow can be varied either
by using different heights of fall or different dropping weights.
|
Impact
Tester 305 |
|
| acc.
to Wegner - ISO, EN, DIN |
|
Portable and handy instrument especially designed for tests on enamel
in accordance with DIN 51 155. Enables the user to carry out tests
on site.
|
Model 408 Single-Blow Impact Tester SPLITT II/III |
|
|
|
Model 408 Single-Blow Impact Tester SPLITT II/III available for either 2 test temperatures of (+23 °C and -20 °C) or
3 test temperatures (+23 °C, 0 °C and -20 °C) in acc. to E DIN 5596-3.
|
Impact
Folding Tester 471 |
|
| |
|
The performance of a coated sheet metal panel previously formed to a
U shape when it is deformed by conical bar in a sudden blow can be
examined.
|
Stone
Hammer Blow Tester 508 |
|
| VDA
- FORD, PEUGOT - CITROEN, RENAULT |
 |
A multi-blow test instrument developed in association with the automotive
industry, offering outstanding reproducibility and comparability
of results. The pressure accumulator dampens variations in the compressed
air mains. Supply of shot particle adjustable.
|
